Pre-measuring Flange Contact

Home Contact Us  

 

 

 

Up
Spindle Tapers-DIN 69063
Pre-measuring Flange Contact
L9 for Ott Gripper Fingers

 
   

Measuring System for Pre-Measuring of the Flange Contact Surface of HSK Spindle Tapers according to DIN 69063 
               
  Attributes: Measuring of axial offset in relation to taper diameter
               
               
  Pre-measuring Device for the Flange Contact Surface (mechanical)
 
Device for measuring the flange contact surface, incl. dial indicator

Pre-measuring device for measuring the flange contact surface including dial indicator and wooden box;
dial indicator certificate optional

NOTE: Pre-setting of the pre-measuring device with gauge blocks (not included).  No separate master gage offered.

  
Form A/B/E/F    
Flange Dia.   Part No.
HSK-E 25   800-0000-004817
HSK-A 32/B 40/E 32   800-0000-004713
HSK-A 40/B 50/E 40/F 50   800-0000-004714
HSK-A 50/B 63/E 50/F 63   800-0000-004715
HSK-A 63/B 80/E 63/F 80   800-0000-004716
HSK-A 80/B 100   800-0000-004717
HSK-A 100/B 125   800-0000-004718
HSK-A 125/B160   800-0000-004777
HSK-A 160   800-0000-007195
Dial indicator certificate    800-0001-00000
               
               
 

Copyright © 2000 STOTZ USA. All rights reserved.
Revised: June 6, 2000

Back Home Up Next