MLS - Air Electronic Column

Specifications

General Operating and Connection Loads

Current Input:     100 – 230VAC / 40 – 60Hz
Capacity:     approximately 20VA
Column Enclosure:     IP40
 Pneumatic Measuring Instruments:     Air Pressure Supply 3 bar (+/- 0,3 bar) 43.5 PSI (+/-4.35 PSI)
Air Pressure Monitor Range:      0,01 … 4 bar  (0.145 – 58 PSI)
Bursting Pressure:     over approximately 8 bar (116 PSI)
Air Conditions:     dry, clean, and oil free
Inductive:     Half-Bridge Connection

Device Specific Characteristics

Processor:     NEC V850 SB1 20MHz
Graphic Display:     Resolution: 32 x 256 Pixel
Pneumatic – Channels:     1 (front side)
Inductive – Channels:      2 (back side T1 / T2)
Measuring Programs:      4
Measuring Groups:     1
Calibration Groups:     2   (Zero, 1 Point, or 2 Point)
Number of Masters:     2   (0, 1,2: None, ZERO, MIN/MAX)
Features displayed:     6 per Measuring Program
Scanning Rate:     50 ms

Interfaces (Back side of MLS)

Digital Inputs and Outputs:     8 x I/O Opto-Isolated (SUB 25D)
Input:     24VDC         <5mA          (Current consumption)
Output:     24VDC        100mA        (max. load)
Selection Box:      WTMSG2 external keyboard
                              Selector switch for programs (1 thru 4)
                              Key – Calibrate (CAL)
                              Keys – Measure (START / STOP)
Serial Interface:     RS232 (COM1)
MLS - Network:     RS485

Temperature Range

Operating Temperature:      10 ... 32⁰C     (50 – 90 F)
Storage Temperature:     0 ... 35⁰C   (32 – 95 F)

Transducer Types and Ranges

Copyright © 2003 STOTZ USA. All rights reserved.
Revised: May 1, 2003